Do Linksys Velop Configuration By WPS

[43732159Participant]

First, take the cell phone and attach it to the Linksys default network. After that, open the Linksys default application. Later, fill in all the relevant login credentials. Now, from the menu icon option, tap on the WiFi settings. From there you can easily do the Velop configuration process by WPS method. After that, press the WPS button of the Linksys Velop device and modem. By doing this the Linksys Velop device automatically paired with the modem.

After following the apart process instructions if you make any fault, then don’t worry try the below solution tips to fix that lapse. Try to locate the Linksys Velop device at the halfway location of the office or house. Upgrade the software of the Linksys Velop from time to time.
Try to restart the Linksys Velop device by pressing its power button. Discard all the previous Linksys Velop configuration settings.

By following the apart steps the Linksys Velop setup app process by using the WPS button is done now.

[Author]

Posts